StereoPi Specifications: Difference between revisions
Appearance
Realizator (talk | contribs) Created page with "Features & Specifications Raspberry Pi Compatibility: Raspberry Pi Compute Module 1 Raspberry Pi Compute Module 3 Raspberry Pi Compute Module 3 Lite Raspberry Pi Compute Modul..." |
Realizator (talk | contribs) mNo edit summary |
||
| Line 1: | Line 1: | ||
Features & Specifications | == Features & Specifications == | ||
Raspberry Pi Compatibility: | === Raspberry Pi Compatibility: === | ||
Raspberry Pi Compute Module 1 | * Raspberry Pi Compute Module 1 | ||
Raspberry Pi Compute Module 3 | * Raspberry Pi Compute Module 3 | ||
Raspberry Pi Compute Module 3 Lite | * Raspberry Pi Compute Module 3 Lite | ||
Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash | * Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash | ||
Raspberry Pi Compute Module 3+ Lite | * Raspberry Pi Compute Module 3+ Lite | ||
Dimensions: | |||
width x length: 90 mm x 40 mm | === Dimensions: === | ||
height: 23 mm (standard edition) / 15 mm (slim edition) | * width x length: 90 mm x 40 mm | ||
Video: | * height: 23 mm (standard edition) / 15 mm (slim edition) | ||
input: two 15-pin CSI-2 camera connectors | |||
output: HDMI | === Video: === | ||
Camera Support: | * input: two 15-pin CSI-2 camera connectors | ||
Raspberry Pi camera V1 (OV5647 sensor) | * output: HDMI | ||
Raspberry Pi camera V2 (Sony IMX 219 sensor) | |||
HDMI video capture module (single mode, on Toshiba TC358743XBG chip) | === Camera Support: === | ||
Connectivity: | * Raspberry Pi camera V1 (OV5647 sensor) | ||
GPIO: 40-pin classic Raspberry Pi header | * Raspberry Pi camera V2 (Sony IMX 219 sensor) | ||
USB: 2 x USB Type-A, 1 x USB pin header | * HDMI video capture module (single mode, on Toshiba TC358743XBG chip) | ||
Ethernet: RJ45 jack | |||
Storage: | === Connectivity: === | ||
microSD card slot (accessed by Raspberry Pi CM3/3+ Lite) | * GPIO: 40-pin classic Raspberry Pi header | ||
Power: | * USB: 2 x USB Type-A, 1 x USB pin header | ||
5 VDC input via two-pin header | * Ethernet: RJ45 jack | ||
manual power switch | |||
Software: | === Storage: === | ||
firmware update via Micro USB connector | * microSD card slot (accessed by Raspberry Pi CM3/3+ Lite) | ||
runs standard Raspbian | |||
=== Power: === | |||
* 5 VDC input via two-pin header | |||
* manual power switch | |||
=== Software: === | |||
* firmware update via Micro USB connector | |||
* runs standard Raspbian | |||
Revision as of 15:28, 24 April 2019
Features & Specifications
Raspberry Pi Compatibility:
- Raspberry Pi Compute Module 1
- Raspberry Pi Compute Module 3
- Raspberry Pi Compute Module 3 Lite
- Raspberry Pi Compute Module 3+ 8 GB / 16 GB / 32 GB eMMC flash
- Raspberry Pi Compute Module 3+ Lite
Dimensions:
- width x length: 90 mm x 40 mm
- height: 23 mm (standard edition) / 15 mm (slim edition)
Video:
- input: two 15-pin CSI-2 camera connectors
- output: HDMI
Camera Support:
- Raspberry Pi camera V1 (OV5647 sensor)
- Raspberry Pi camera V2 (Sony IMX 219 sensor)
- HDMI video capture module (single mode, on Toshiba TC358743XBG chip)
Connectivity:
- GPIO: 40-pin classic Raspberry Pi header
- USB: 2 x USB Type-A, 1 x USB pin header
- Ethernet: RJ45 jack
Storage:
- microSD card slot (accessed by Raspberry Pi CM3/3+ Lite)
Power:
- 5 VDC input via two-pin header
- manual power switch
Software:
- firmware update via Micro USB connector
- runs standard Raspbian