StereoPi Mechanics: Difference between revisions
Realizator (talk | contribs) |
Realizator (talk | contribs) |
||
| Line 6: | Line 6: | ||
==Cases for 3D print== | ==Cases for 3D print== | ||
[[File:Stereopi-basic-case-thingiverse.jpg|none|300px|StereoPi basic case preview]] | |||
* [http://wiki.stereopi.com/files/stereopi-basic-case.stl Basic case] | * [http://wiki.stereopi.com/files/stereopi-basic-case.stl Basic case] | ||
<br> | |||
[[File:Stereopi-360-panorama-cover.jpg|none|300px|StereoPi 360 panorama case cover preview]] | |||
* [http://wiki.stereopi.com/files/stereopi-panorama-360.stl Panorama 360 case cover] | * [http://wiki.stereopi.com/files/stereopi-panorama-360.stl Panorama 360 case cover] | ||
<br> | |||
[[File:Stereopi-camera-plate-fixator.jpg|none|300px|StereoPi camera plate fixator]] | |||
* [http://wiki.stereopi.com/files/stereopi-slim.step.zip Camera plate fixator (optional)] | * [http://wiki.stereopi.com/files/stereopi-slim.step.zip Camera plate fixator (optional)] | ||
Revision as of 19:05, 13 February 2019
Camera support plates
Cases for 3D print
Step file (3D model of the board)
You can use free Autodesk viwer to view these STEP files here: https://viewer.autodesk.com
Pi Camera V1 features and drawings
Pi Camera V2 features and drawings
Waveshare wide angle camera features and drawings